用途 Usage
本產品適用于對地電壓交流不超過200V和脈動直流峰值400V電焊機用二次側接線及連接電焊鉗。
This product is suitable for voltage to ground not more than 200V and its pulsating current calue 400V welding machiing conngcting line and so on
型號、名稱及工作溫度 Type names and workin tempertute
|
型號 Model |
名稱 Name |
線芯長期工作溫度（℃） Working temperature cf coce |
| YH |
天然膠護套電焊機電纜 Natural rubber sheath for welding machine cable |
65 |
| YHF |
氯丁或其他相當的合成膠彈性體護套電焊機電纜 Hororene rubber or other syntheitic rubber sheath welding machinr cable |
規格尺寸、重量及技術參數 Specifications size weight and technologica data
|
導線標稱截面 Conductive Nominal section |
導電線芯結構 Conductivecore(mm) |
護套標稱厚度 Nomonal sheath thickness(mm) |
平均外徑 Average outer diameter |
20℃導體直流電阻≤（?km） 20℃ conductor resistane≤（?km） |
電纜參考重量 Cable reference weight |
||
|
單線/根數標稱直徑 Number/Diameter of core(mm) |
最小值 Min |
最大值 Max |
YH | YHF | |||
| 10 | 322/0.20 | 1.8 | 7.5 | 9.7 | 1.91 | 146 | 153 |
| 16 | 513/0.20 | 2.0 | 9.2 | 11.5 | 1.16 | 218 | 230 |
| 25 | 798/0.20 | 2.0 | 10.5 | 13.0 | 0.758 | 316 | 331 |
| 35 | 1121/0.20 | 2.0 | 11.5 | 14.5 | 0.536 | 426 | 439 |
| 50 | 1596/0.20. | 22 | 13.5 | 17.0 | 0.379 | 592 | 610 |
| 70 | 2214/0.20 | 2.4 | 15.0 | 19.5 | 0.268 | 790 | 817 |
| 95 | 2997/0.20 | 2.6 | 17.0 | 22.0 | 0.198 | 1066 | 1102 |
| 120 | 1702/0.30 | 2.8 | 19.0 | 24.0 | 0.161 | 1348 | 1392 |
| 150 | 2135/0.30 | 3.0 | 21.0 | 27.0 | 0.129 | 1678 | 1690 |
| 185 | 14430/0.40 | 3.2 | 22.0 | 29.0 | 0.106 | 198. | 2020 |
交貨要求 Delivery repuirements
電線的交貨長度成圈者為100m，成盤者應不小于100m，允許不小于20m的短路交貨，短段電纜的交貨數量不超過交貨總長度，根據雙方協議允許在任何長度的電纜交貨
The length of wire delivery is 100m, the length of wire delivery should not be less than 100m, the number of short-circuit delivery should not be less than 20m, the quantity of short-section cable delivery should not exceed the total length of delivery, and the length of cable delivery should be allowed in accordance with the agreement between the two parties.